MuST FBG Deformation Sensor

MuST FBG Deformation Sensor
Long-gauge Deformation sensor
Robust and EASY TO INSTALL

For surface mounting or embedding in concrete and mortars.

Ideal for long-term structural deformation monitoring.

20 year track record in field applications.


Nhận báo giá Hotline Email PDF
×

Vui lòng để lại thông tin của bạn trước khi tải xuống sản phẩm PDF.

Lưu ý: Vui lòng đảm bảo bạn đã nhập đúng địa chỉ E-mail. Chúng tôi sẽ gửi cho bạn thông tin liên quan và báo giá sản phẩm thường xuyên.

The MuST FBG deformation sensors are transducers that transform a static or dynamic distance variation into a change in reflected wavelength of a pre-stressed Fiber Bragg Grating that can be measured with SMARTEC Reading Units.

The sensor is composed of an active and a passive part. The active part contains the measurement fiber and measures the deformations between its two ends, transforming it into a wavelength shift of the Fiber Bragg Grating. The passive part is insensitive to deformations and is used to connect the sensor to the Reading Unit. In the passive part of the sensor, it is possible to install a loose Fiber Bragg Grating for temperature sensing and compensation.

The sensors are available in single-ended, double-ended and chained configuration. Using our Readout Units it’s possible to connect up to 7 full-range temperature compensated sensors on the same channel (or up to 4 with temperature compensation + 4 without). The sensors are terminated with E2000-APC connectors or on user‘s specifications.

The sensors can be quickly and easily installed without affecting the construction schedule. They can be directly embedded in concrete and mortars, or surface mounted.

SPECIFICATIONS

Length of active zone (LA, measurement basis):

20 cm to 2m

Length of passive zone (connecting cable):

1 to 200 m (longer distances available on request)

Pre-tensioning of the measurement fiber:

0.5% of the length of active zone (others on special request)

Measurement range:

Strain: 0.5 % in shortening, 0.75 % in elongation              
 Temperature: -40 °C to +80 °C

Measurement resolution/ Accuracy:

0,2 µε / 2 µε (using SMARTEC Reading Units)

Connecting cable protection options (see specific datasheet for details):

Standard cable: Gray (for embedding or surface mounting in normal conditions); Stainless steel reinforced cable: Black (recommended in harsh conditions); Simple unprotected cable: Yellow (only for laboratory conditions)

Optical connectors:

E-2000 AC (8°)

Operating temperature:

Passive zone: -40 °C to +80 °C; Standard active zone: -50 °C to +110 °C; Special active zone (upon request): -50 °C to +170 °C

Waterproof:

5 bars (15 bars with extra protection on anchoring points)

ORDERING INFO
  • Length of active zone
  • Length of passive zone
  • Connecting cable type
  • FBG Wavelength
  • Temperature compensation (Yes/No)
  • Single/Double Ended
Yêu cầu
Vui lòng gửi thông tin yêu cầu của bạn cho chúng tôi. Chúng tôi sẽ liên lạc ngay thời gian sớm nhất

Gửi liên hệ thành công. Chúng tôi sẽ phản hồi trong thời gian sớm nhất

Quá trình thực hiện không thành công. Vui lòng thử lại sau

Đối tác - Khách hàng

088.604.6088