HK-3011SK Open Cup Flash Point Tester

HK-3011SK is used to measure the combustion possibility of the flammable liquid in the open environment.
Supplies category:HK-3011SK Open Cup Flash Point Tester
Material code:HK-3011SK
Manufacturer:HKY Technology Co.,Ltd.
Nhận báo giá Hotline Email PDF
×

Vui lòng để lại thông tin của bạn trước khi tải xuống sản phẩm PDF.

Lưu ý: Vui lòng đảm bảo bạn đã nhập đúng địa chỉ E-mail. Chúng tôi sẽ gửi cho bạn thông tin liên quan và báo giá sản phẩm thường xuyên.

Introduction

 

HK-3011SK Open Cup Flash Point Testeris used to measure the combustion possibility of the flammable liquid in the open environment, according to the GB/T 3536-2008 《Petroleum products-Determination of flash and fire point-Cleveland open cup method》, suitable for petroleum products(expect for the fuel oil, fuel oil usually according to the GB/T261 to measure the close cup flash point ) that the open cup flash point is higher than 79℃. The instrument is composed of measuring system (Oil cup、heater、cooling fan、Igniter、stirrer and so on)and displaying system. Measuring system can measure and send the measuring result to the displaying system; The displaying system receive the result and display, also can control the measuring system through the touch screen.

The displaying system is adopted of the colorful LCD Touch-screen, Language: Chinese and English are all available,with prompt menu、guiding type input、pre-setting temperature、oil No、air pressure、testing date and so on. In addition, This instrument built-in fuzzy control software,  fast-response、measurement accuracy, is your ideal selection, and widely used in railway, aviation, electric power, oil industry and scientific research departments.

 


 

 

Feature

◆ Adopted 7" 640*480 colorful LCD Touch-screen, Chinese and English are available,  with the guiding menu, easy-operating.

◆ Heating、Igniting、Measuring、Printing、Cooling are automatically.

◆ Simulation tracing and showing the function curve of the temperature up and testing time, with the wrong operation prompting and change function.

◆ When the temperature is higher than the pre-set value, heating will be stop automatically. The gas will be cut automatically when the measuring is over.

◆ High precision ionization detection method.

◆ The igniting system is adopted the new type of silicon nitride igniter, which is almost similar to the open flame, reliable repeatability, long operating life.

◆ With the gas ignition automatically, no use the Artificial ignition.

◆ With safety function of self-inspection、diagnose、failure warning.

◆ Built-in air pressure sensor, pressure can correct automatically, no need to set the air pressure value.

◆ The local area network data transmission and firmware upgrade through RJ45 connector.

◆ Upgrading software and exporting data through the USB connector.

◆ 1000 measuring records can be saved, and if needed, all records can be checked and printed.

Technique Data

1、Range:ambient temperature~400℃;

2、Accuracy:±2℃;

3、Repeatability:≤4℃;

4、Resolution:0.1℃;

5、Temperature up rate:Suitable to GB/T 3536-2008 standard;

6、Ignition type:Automatic electronic ignition.

7、Cooling type:Forced cooling.

8、Power consumption:≤800W

9、Printing function:Built-in micro thermal printer,artificial and automatic is up to.

10、1000 measuring records can be saved, and if needed,all records can be checked and printed.

11、Outsize & weight:Controlling part: L270mm×W170mm×H130mm, 2.0kg. 

                                       Testing part: L480mm×W245mm×H280mm, 18.0kg

Configure

1、Open cup

1 piece

2、Electronic igniter element

1 piece

3、Power pallet

1 piece

4、Data pallet

1 piece

5、Hex wrench

1 piece

6、Fire cover

1 piece

7、Open cup air jet Components

1 piece

8、Protective tube

2 piece

9、Printer paper

1 roll

10、Power cable

1 piece

11、Operation manual

1 book

12、Warranty bill

1 piece

13、Product qualification certificate

1 piece

Application Environment:

 

 

1、Working power::1) AC(170~264)V, 50/60Hz;

                                  2) AC(120±10%)V, (60±1)Hz, (according to your actual demand).

 

2、Ambient temperature:(5~45)℃;

3、Air pressure:(98.0~104.7)kPa;

4、Relative environment humidity:≤85%RH

The instrument should be put into a no air flow laboratory and on a stable and no glare table.

The laboratory should have fire extinguisher and other extinguish material.

Don’t put any inflammable、explosive and strong corrosive gas or liquid around the instrument, no strong electromagnetic interference and obvious mechanical shock.

Sản phẩm liên quan

Yêu cầu
Vui lòng gửi thông tin yêu cầu của bạn cho chúng tôi. Chúng tôi sẽ liên lạc ngay thời gian sớm nhất

Gửi liên hệ thành công. Chúng tôi sẽ phản hồi trong thời gian sớm nhất

Quá trình thực hiện không thành công. Vui lòng thử lại sau

Đối tác - Khách hàng

Xem thêm: yokogawa-vn.com

088.604.6088

latex clothing uk
latex catsuit
latex dress
latex dresses