Introduction
HK-3011SB Close Cup Flash Point Tester is used to measure the combustion possibility of the flammable liquid in the Closed environment, suitable for petroleum products(Distillate oil with close cup flash point higher than 40℃、Unused lubricating oil and other liquids).
The instrument is composed of measuring system (Oil cup、heater、cooling fan、Igniter、stirrer and so on)and displaying system. Measuring system can measure and send the measuring result to the displaying system; The displaying system receive the result and display, also can control the measuring system through the touch screen.
Feature
◆ Adopted 7" 640*480 colorful LCD Touch-screen, Chinese and English are available, with the guiding menu, easy-operating.
◆ Heating、Igniting、Measuring、Printing、Cooling are automatically.
◆ Simulation tracing and showing the function curve of the temperature up and testing time, with the wrong operation prompting and change function.
◆ When the temperature is higher than the pre-set value, heating will be stop automatically. The gas will be cut automatically when the measuring is over.
◆ The igniting system is adopted the new type of silicon nitride igniter,which is almost similar to the open flame, reliable repeatability, long operating life.
◆ With the gas ignition automatically, no use the Artificial ignition.
◆ With safety function of self-inspection、diagnose、failure warning.
◆ Built-in air pressure sensor, pressure can correct automatically, no need to set the air pressure value.
◆ The local area network data transmission and firmware upgrade through RJ45 connector.
◆ Upgrading software and exporting data through the USB connector.
◆ 1000 measuring records can be saved, and if needed, all records can be checked and printed.